Question:
Wondering if you know of a way to break apart joints glued with Gorilla Glue. Whoever tried to repair this antique dresser drawer let the glue squeeze out all over and didn’t clamp the joints so one has set up so far apart the drawer won’t fit in the case. I can use a sharp knife to cut out the squeeze out, but how do I get the joints apart? The Gorilla folks say there is no chemical that will break the bond.
Submitted by Joe
Answer:
I’m assuming you mean Gorilla’s polyurethane glue, not their wood glue.
It seems like Gorilla Glue would know their own product best, but a little cruising on the web indicates that denatured alcohol or acetone might loosen the hardened glue up. Home centers or paint stores should carry either product. I’d lean toward trying the denatured alcohol first as it’s not as potent as the acetone. If denatured alcohol doesn’t do it, go to the stronger solvent, acetone. In either case, work in a well-ventilated area and be sure to wear the right protective gear.
From what I read it looks like it’s important to allow the solvent to soak in for a while, 10 minutes or so, before trying to remove the glue.
Good luck.
George
Do you have a question for WWGOA? Ask us on Facebook or email editor@wwgoa.com. Note: questions may be edited for clarity and relevance.
I just bought a home and have a king size headboard and can't get it up the stairs i wood like to know if there's a way I could break down the glue to take it apart without damaging it if possible
what would be the best way to cut a splayed leg chair to get the chair leg bottom to sit flat on the floor. The chair now rest on the inside edge and leave marks in the vinyl tile . It's like holding a wooden dowel at oh say 30 degree angle, and the only part of the dowel on the floor is the edge.
Hammers will say 16 oz, 20 oz or 22 oz. They all feel about the same in weight, please explain. Thanks!
"GLU-MAN' Glue Spreader is available in 200 mm / 130mm / 80 mm versions. It ensures even distribution, saves glue and time. Stainless Steel Body with 200mm PU roller is the largest device out there in the global market. Larger tank capacity makes it easy to use and reduces refilling time. Special PU Roller gives a long life and has anilox texture for even spread and achieving thin glue line. Any glue can be used, where a suitable solvent cleaner is available to clean the roller and tank. GLU-MAN IS MADE FOR ANY INDUSTRY WHERE PASTING JOB IS DONE We are looking forward to be your channel partner and associate for quality products. https://www.youtube.com/watch?v=zijLAo268Lk
What type paint do you use for creating the cracking, i.e. oil or water based?